Winchester-repeating-arms Wildcat User Manual download pdf (Page 16)

the barrel at the receiver end and run it back and

forth several times. NOTE: Use a crown protector if

you are cleaning from the muzzle end of the barrel.

Damage to the crown of a barrel can affect the accuracy

of your rifle.

3. Inspect the chamber and bore for powder fouling.

A normal amount of powder residue can be expected

and is not serious. It can usually be removed by

repeating step 2, using a patch saturated with solvent.

If, or when, fouling should become heavy, it can be

removed with a brass bore brush. Dip or spray the brush

with solvent and scrub the chamber and bore until the

fouling is removed. To prevent brass bristles from

breaking off, the brush should be pushed completely

through the bore before being withdrawn.

4. After fouling has been removed the bore should

be wiped dry. Then pass a lightly oiled patch

through the bore for preservation. A fine, light gun

oil is recommended.

5. Wipe all exposed metal surfaces of the receiver, forearm

and barrel with a clean rag. Finger marks should be

removed because they provide a place where moisture

can accumulate. Any dried oil in the receiver area

should also be removed.

6. Lightly oil the bolt guide lugs and guide rails. Ordinary

good judgment will, of course, indicate that the metal

of the gun should receive a light film of oil any time the

rifle has been exposed to weather or handling. This is

very important and must be done with every firearm.

Remember, the fitted surfaces of the receiver and

action mechanisms must always have a thin film of

oil. Make sure that the surfaces of the breech bolt are

especially clean and lightly oiled with a high quality

gun oil. Do not use pure silicone or lanolin.

7. Inspect the barrel and chamber. Make certain that no

patches have been inadvertently left in them. Remove

any that remain.

8. Wipe all wood surfaces with a lightly oiled cloth.

9. When transporting your rifle, store it in a quality

protective case to prevent scratches and dents. Store

your rifle in a dry place to prevent corrosion. Store your

rifle and ammunition separately, away from children.

MAKE SURE YOUR RIFLE IS UNLOADED AND ALWAYS

STORE AMMUNITION SEPARATELY.

OTHER CLEANING SUGGESTIONS —

• Never pour large quantities of oil into the receiver or

other parts of your rifle. It can drain down into the

wood and soften it, causing permanent damage and

loosening of the stock.

• After extended periods of heavy use, your gun should

be taken to a qualified gunsmith to have the action

disassembled for professional cleaning and lubrication.

05-572-WFA_OM Wildcat 6 3/21/06 11:28 AM Page 15

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Winchester-repeating-arms Wildcat User Manual Page 16

Comments to this Manuals

Related products and manuals for Sports and recreation Winchester-repeating-arms Wildcat